To Next Page

To Previous Page

Installing the IBM Power System S922 (9009-22A

and 9009-22G), IBM Power System H922

(9223-22H), or IBM Power System H922S (9223-22S)

Use this information to learn about installing the IBM Power

System S922 (9009-22A and 9009-22G),

IBM Power System H922 (9223-22H), or IBM Power System H922S (9223-22S) servers.

Installing a rack-based server

Use this information to learn about installing a rack-based server.

Prerequisite for installing the rack-mounted server

Use the information to understand the prerequisites that are required for installing the server.

About this task

You might need to read the following documents before you begin to install the server:

• The latest version of this document is maintained online. See Installing the IBM Power System S922

(9009-22A and 9009-22G), IBM Power System H922 (9223-22H), or IBM Power System H922S

(9223-22S) (http://www.ibm.com/support/knowledgecenter/POWER9/p9egh/p9egh_roadmap.htm).

• To plan your server installation, see Planning for the system (http://www.ibm.com/support/

knowledgecenter/POWER9/p9had/p9had_90x_kickoff.htm.

• If you are using a Hardware Management Console (HMC), see Update the Hardware Management

Console (http://www.ibm.com/support/knowledgecenter/POWER9/p9eh6/p9eh6_updatehmc.htm).

Consider the following prerequisites before you install the server:

Procedure

1. Ensure that you have the following items before you start your installation:

• Phillips screwdriver

• Flat-head screwdriver

• Rack with four units of space

Note: If you do not have a rack that is installed, install the rack. For instructions, see Racks and rack

features (http://www.ibm.com/support/knowledgecenter/POWER9/p9hbf/p9hbf_9xx_kickoff.htm).

2. Ensure that you have one of the following consoles:

• Hardware Management Console (HMC): To manage POWER9 processor-based systems, the HMC

must be at version 9 release 9.2.0, or later.

• Graphic monitor with keyboard and mouse.

• Teletype (tty) monitor with keyboard.

Completing inventory for your server

Use this information to complete inventory for your server.

About this task

To complete the inventory, complete the following steps:

Questions and Answers:

Need help?

Do you have a question about the IBM S922 and is the answer not in the manual?

IBM S922 Specifications

General

Processor	POWER9
Number of Processors	1 or 2
Processor Sockets	2
Memory Capacity	Up to 4 TB
Memory Slots	32
Memory Type	DDR4
Form Factor	2U rack server
Operating Systems Supported	AIX, IBM i, Linux
Storage	SAS, SATA, NVMe
Storage Bays	Up to 24
Power Supply	Dual, redundant