IBM System x3650 M4 HD User Manual

IBM System x3650 M4 HD 22
The specific slots that are available depend on the riser cards that are installed in Riser socket 1 and
Riser socket 2, as shown in the following table. Standard models except for model H3x have 00Y7759
installed in Riser socket 1.
Tip: All slots support full-height adapters. Slots 1, 4, and 5 support full-length adapters, and slots 2, 3, and
6 (when present) support half-length adapters.
Table 12. PCIe slot descriptions (FH=full height, FL=full length, HL=half length, DW=double width)
Slot
number
PCIe 3 x8 riser
00Y7759 (standard)
PCIe x16 riser
00Y7757
PCI-X riser
00Y7758
GPU riser
00Y7760
1: PCIe 3.0 x8; FH, FL 1: PCIe 3.0 x16 FH, FL 1: PCI-X 64b/133 FH, FL 1: No slot present
2: PCIe 3.0 x8; FH, HL 2: PCIe 3.0 x8 FH, HL 2: PCI-X 64b/133 FH, HL 2: PCIe 3.0 x16 FH, FL, DW
Riser
socket 1
(CPU 1)
3: PCIe 3.0 x8; FH, HL 3: No slot present 3: PCIe 3.0 x16 FH, HL 3: PCIe 3.0 x8 FH, HL
4: PCIe 3.0 x8 FH, FL 4: PCIe 3.0 x16 FH, FL 4: PCI-X 64b/133 FH, FL 4: No slot present
5: PCIe 3.0 x8 FH, FL 5: PCIe 3.0 x8 FH, FL 5: PCI-X 64b/133 FH, FL 5: PCIe 3.0 x16 FH, FL, DW
Riser
socket 2
(CPU 2
required)
6: PCIe 3.0 x8 FH, HL 6: No slot present 6: PCIe 3.0 x16 FH, HL 6: PCIe 3.0 x8 FH, HL
Note: Slots 4, 5, and 6 require a second processor to be installed.
Network adapters
x3650 M4 HD supports four integrated Gigabit Ethernet ports. Optionally, two 10 Gb Ethernet ports or
InfiniBand can be added by installing one of the available dual-port mezzanine cards that are listed in the
following table. These cards use a dedicated connector on the system board and do not use a PCI
expansion slot.
Integrated NICs have the following features:
Intel I350AM4 chip

Four GbE ports

TCP Offload Engine (TOE) support

Wake on LAN support

802.1Q VLAN tagging support

NIC Teaming (load balancing and failover)


IBM System x3650 M4 HD Specifications

General

Brand	IBM
Model	System x3650 M4 HD
Category	Server
Language	English