IBM THINKCENTRE 8141 User Manual

Connector Description
Ethernet connector Used to attach an Ethernet cable for a local area network
(LAN).
Note: To operate the computer within FCC Class B limits, use
a Category 5 Ethernet cable.
USB connectors Used to attach a device that requires a Universal Serial Bus
(USB) connection, such as a USB scanner or USB printer. If you
have more than six USB devices, you can purchase a USB hub,
which you can use to connect additional USB devices.
Mouse connector Used to attach a mouse, trackball, or other pointing device that
uses a standard mouse connector.
Parallel connector Used to attach a parallel printer, parallel scanner, or other
devices that use a 25-pin parallel connector.
Serial connectors Used to attach an external modem, serial printer, or other
devices that use a 9-pin serial connector.
Audio line out connector Used to send audio signals from the computer to external
devices, such as powered stereo speakers (speakers with
built-in amplifiers), headphones, multimedia keyboards, or the
audio line in connector on a stereo system or other external
recording device.
Audio line in connector Used to receive audio signals from an external audio device,
such as a stereo system. When you attach an external audio
device, a cable is connected between the audio line out
connector of the device and the audio line in connector of the
computer.
Keyboard connector Used to attach a keyboard that uses a standard keyboard
connector.
Obtaining device drivers
You can obtain device drivers for operating systems that are not preinstalled at
http://www.ibm.com/pc/support/ on the World Wide Web. Installation
instructions are provided in README files with the device-driver files.
Chapter 1. Installing options 9

IBM THINKCENTRE 8141 Specifications

General

Brand	IBM
Model	THINKCENTRE 8141
Category	Desktop
Language	English