IBM THINKCENTRE 8141 User Manual

Chapter 2. Using the IBM Setup Utility program
The IBM Setup Utility program is stored in the electrically erasable programmable
read-only memory (EEPROM) of your computer. The IBM Setup Utility program is
used to view and change the configuration settings of your computer, regardless of
which operating system you are using. However, the operating-system settings
might override any similar settings in the IBM Setup Utility program.
Starting the IBM Setup Utility program
To start the IBM Setup Utility program, do the following:
1. If your computer is already on when you start this procedure, shut down the
operating system and turn off the computer.
2. Press and hold the F1 key then turn on the computer. When you hear the
multiple beeps, release the F1 key.
Note: If a user password or an administrator password has been set, the IBM
Setup Utility program menu is not displayed until you type your
password. See “Using passwords” for more information.
The
IBM Setup Utility might start automatically when POST detects that hardware
has been removed or new hardware has been installed in your computer.
Viewing and changing settings
The IBM Setup Utility program menu lists items that identify system configuration
topics.
When working with the IBM Setup Utility program menu, you must use the
keyboard. The keys used to perform various tasks are displayed at the bottom of
each screen.
Using passwords
By using the IBM Setup Utility program, you can set passwords to prevent
unauthorized persons from gaining access to your computer and data. The
following types of passwords are available:
v User Password
v Administrator Password
v IDE Drive User Password
v IDE Drive Master Password
You
do not have to set any passwords to use your computer. However, if you
decide to set any passwords, read the following sections.
Password considerations
If you are setting any of the various types of passwords on your computer, you
should read and understand the following information:
© Copyright IBM Corp. 2004 25

IBM THINKCENTRE 8141 Specifications

General

Brand	IBM
Model	THINKCENTRE 8141
Category	Desktop
Language	English