Important safety instructions
DANGER
Electric current from power, telephone, and
communication cables is hazardous. To avoid shock
hazard, connect and disconnect cables as shown
below when installing, moving, or opening the covers
of this product or attached devices. If the 3-pin power
cord is provided with this product, it must be used
with a properly grounded outlet.
Turn everything OFF.
Turn everything OFF.
First, attach all cables to devices.
First, remove the power cord from
the outlet.
Attach the signal cables to
receptacles.
Remove signal cables from
receptacles.
Attach the power cord to an outlet.
Remove all cables from devices.
Turn the device ON.
To Connect
To Disconnect
Copyright IBM Corp. 2000 v
To Next Page
Loading...
Need help?
General