1120 Fansink
For access, remove following FRUs, in order:
v “1010 Battery pack” on page 76
v “1020 Hard disk drive” on page 77
v “1030 DIMM cover” on page 78
v “1040 Mini PCI adapter, DIMM, MDC-2, and BMDC-2”
on page 79
v “1070 Backup battery” on page 88
v “1050 Keyboard” on page 82
v “1060 Upper case” on page 85
v “1090 Hard disk housing assembly” on page 92
v “1100 Top shielding” on page 93
v “1110 Lower case” on page 94
Remove Fan cable then release four screws to remove
Fansink.
Step Screw (quantity) Torque
1 M2 ×7.3 mm (4) 0.196 Nm
(2
kgfcm)
Removing and replacing a FRU
98 MT 2369/2370/2371/2372/2382/2386
To Next Page
Loading...
Need help?
General