Key
combination
Description
Fn+F8 Display expansion
Horizontal/Vertical
screen expansion (hardware
stretch) function is enabled, so that VGA mode
screen will be expanded to whole size of SVGA
LCD or XGA LCD.
Note:
1. In ACPI OS (Windows XP, Windows 2000,
and later), this function is not supported.
2. When hardware overlay screen or 3D full
screen application is active, this
hotkey-function will be disabled.
Fn+F9 Issue device ejection
Opens
the IBM ThinkPad EasyEject Utility
screen. Buttons for the following choices are
displayed:
v Run EasyEject Actions: User can select,
stop, and remove external devices connected
to the ThinkPad computer.
v Configure EasyEject Actions: User can
open the IBM ThinkPad EasyEject Utility
main window.
v Fn+F9 Settings: User can configure the
settings for the Fn+F9 function.
Note:
This function is supported only in
Windows XP and Windows 2000.
Fn+F10 Reserved.
Fn+F11 Reserved.
Fn+F12 Hibernation
Turn
hibernation mode on. To return to normal
operation, press the power button for less than
four seconds.
Note: To use Fn+F12 for hibernation in
Windows XP and Windows 2000, the IBM PM
device driver must have been installed on the
computer.
Fn+PgUp ThinkPad light
Note:
This function is supported only on the
ThinkPad computer that have the ThinkLight.
The on or off status of the ThinkLight is shown
on the screen for a few seconds when the user
press Fn+PgUp.
Fn+Home LCD brightness up
The
LCD becomes brighter.
Fn+End LCD brightness down
The
LCD becomes less bright.
Fn+Spacebar FullScreen magnifier
Enable
the FullScreen Magnifier function.
Product overview
58 MT 2369/2370/2371/2372/2382/2386
To Next Page
Loading...
Need help?
General