IBM VIAVOICE 10-STANDARD EDITION User Manual

Installing the ViaVoice software
1. Insert the ViaVoice CD in your CD-ROM drive to start the installation
program. If it does not start automatically, do the following:
a. Click Start > Run from the Windows taskbar.
b. Type d:\setup (where d is your CD-ROM drive).
c. Click OK.
2. Follow the instructions on the screen.
During installation you will see the following windows. (This section does not
show all windows you will see.)
Language selection—Choose the language version you want to install and
click Next.
2 ViaVoice for Windows Standard Edition

IBM VIAVOICE 10-STANDARD EDITION Specifications

General

Brand	IBM
Model	VIAVOICE 10-STANDARD EDITION
Category	Software
Language	English