HOW TO USE THE REFRIGERATOR
The Fridge/Freezer is designed to operate on DC voltage inputs.
DC input 12V or 24V
DC cable
2.5m,16AWG
● Connect the feeding cable to a direct current 24V DC power source.
● Make sure the polarity is right.
● If connected to an existing cigarette plug, please carefully check up that power supply is sufficient.
● If the supplied power cable is not used, please see the table containing the information related to the
cable section:
4
1.When use as a cooler
Notice! Danger of Damaged
The Highest water level cannot higher than the compressor positions when you use as a cooler
2.Connecting with 12V or 24V
3.Connecting with 110-240V
The coolers have an integrated multi-voltage power supply with priority circuit for connecting
to an AC voltage source of 110-240V. The priority circuit automatically switches the cooler
to mains operation, if the device is connected to a 120/240V AC mains, even if the 12/24V
connection cable is still attached. In order to protect the freezer and cigarette socket, we
suggest use with one power supply.
To Next Page
Loading...
Need help?
General
