22
BLASTING HOSE REPAIR
Blasting hoses must only be repaired either by an IceTech technician or by the
owner’s qualied personnel having been trained by IceTech in the repair and
maintenance of IceTech dry ice blasting machines and accessories. Beyond the
necessary knowledge, the person concerned must have appropriate tools and
equipment, as well as the auxiliary materials required, at his disposal.
The operator must NEVER repair the blasting
hose without using original IceTech spare parts!
IceTech offers three different types of blasting hoses: HD hoses, ber reinforced
silicon hoses and Teon hoses.
PRECAUTIONS: ELECTRIC CONNECTION
MAIN POWER SUPPLY
The main electric connection supplies the machine with LN + PE. (L-N), respecting
the live/phase (L), neutral (N) and ground (PE) connections The machine voltage is
specied on the rating plate. The control circuits use 24 V DC.
OFF BUTTON
The OFF button cuts off voltage to the control circuits, but does not make the
machine voltage-free.
The machine is only voltage-free when the main
power supply has been disconnected.
COVER PLATE AT THE HOPPER BOTTOM
A cover plate is tted at the bottom of the hopper to prevent the operator from
coming into contact with the moving parts of the dosing unit during operation.
Since the cover plate is part of the safety precautions of the machine, it must NOT
be removed.
To Next Page
Loading...
Need help?
General
