7
3
Bluetooth
®
OPERATION
■ Pairing with a headset
These instructions describe pairing with the VS-3 Bluetooth
®
headset. You can pair a maximum of 7 Bluetooth
®
headsets
with the transceiver.
• If you try to pair a Bluetooth
®
headset to a transceiver that already
has 7 headsets paired with it, the oldest headset will automatically
be unpaired.
1. Turning ON transceiver’s Bluetooth
®
function
1) Open the “BLUETOOTH FUNC” item.
2) Activate the Bluetooth
®
unit.
➥ Select “ON” and push [
/MHz/GRP].
2. Entering the Pairing mode of the VS-3
• See the VS-3’s instruction manual for details.
3. Pairing the Bluetooth
®
headset
1) Open the “DEVICE SEARCH” item.
3) Select the desired headset to pair.
➥ Push [∫] or [√] and then push [
/MHz/GRP].
• A passkey or PIN code may be required to pair,
depending on the headset. Refer to your headset’s
instructions for details.
4) Exit the Menu mode.
➥ Push [
].
• “ ” is displayed if the headset is correctly paired.
■ Connecting a paired headset
If you have a previously paired headset, follow the steps
below to connect it.
1) Open the “PAIR/CONNECT” menu.
MENU > BLUETOOTH > PAIR/CONNECT
• The paired headsets are displayed.
2) Select the desired headset to connect.
➥ Push [∫] or [√] and then push [
/MHz/GRP].
• “CONNECT” and “UNPAIR” is displayed.
3) Connect the headset.
➥ Select “CONNECT” and then push
[
/MHz/GRP].
• The check mark “4” in the box is displayed.
4) Exit the Menu mode.
➥ Push [
].
2) Search for a headset to pair.
➥ Select “HEADSET” and push
[
/MHz/GRP].
•
The found headsets are displayed.
• “NOT FOUND” is displayed if no
headsets are found.
• Push [MENU/CLR] to cancel
searching.
• The headset name changes to
its Bluetooth
®
device address in
5 seconds.
MENU > SETTINGS > BLUETOOTH > BLUETOOTH FUNC
MENU > BLUETOOTH > PAIR/CONNECT >DEVICE SEARCH
To Next Page
Loading...
Need help?
General
Weight and Dimensions
