14
9
SET MODE
You can use the Set mode to set infrequently changed
values or function settings.
1. Push [FUNC], and then hold down [ENT]/[SET]
for 1 second.
L Set mode item is displayed.
2. Push [MR]/[MW] to select an item.
L Push [ENT]/[SET] to go to the next tree level, go
back a level by pushing [CLR]/[HOME].
3. Push [▲] or [▼] to select an option.
4. Push [CLR]/[HOME] to exit the Set mode.
NOTE: The Set mode items contained in the
transceiver may be different, depending on the
transceiver’s version or presettings.
■ Backlight “ ”
Selects the backlight options.
• OFF: The backlight is OFF.
• ON: The backlight is always ON.
• AUTO: The backlight is ON for 5 seconds when a key
other than [PTT] is pushed.
■ MIC gain “ ”
Select a MIC gain option from H (High), M (Medium),
or L (Low).
■ MIC Audio Input “ ”
Select a microphone to input the audio.
• AUTO: Transmit the audio from the device whose
[PTT] is pushed.
• INT:
Transmit the audio from the internal microphone.
• EXT:
Transmit the audio from the external microphone.
• BT*:
Transmit the audio from the Bluetooth headset.
*For only the transceiver with built-in Bluetooth unit.
■ VOX setting “ ”
Turn the VOX function ON or OFF.
The function automatically switches between receive
and transmit by detecting your voice.
• OFF: Turns OFF the function.
• ON: Switches between receive and transmit by
detecting your voice.
■ VOX Level “ ”
Set the VOX gain level to between 1 and 6.
Higher values make the VOX function more sensitive
to your voice.
■ VOX delay “ ”
Set the VOX Delay to between 0.5 seconds and 3.0
seconds. The VOX Delay is the amount of time that
the transmitter stays ON after you stop speaking, until
the VOX switches to receive.
■ Time Out Timer “ ”
Turn the Time Out Timer (TOT) function ON or OFF.
This function limits continuous transmissions on the
channel, to prevent from occupying the channel for a
long period of time.
• OFF: Turns OFF the function.
• 20 to 180: Set the Time-out Timer to between 20 seconds
and 180 seconds.
■ Battery voltage “ ”
Displays the battery voltage.
Set mode items
Using the Set mode
To Next Page
Loading...
Need help?
General
