EasyManuals Logo
Home>Icom>Transceiver>IC-A16

Icom IC-A16 Full Manual

Icom IC-A16
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
4
2
PANEL DESCRIPTION
Front, top, and side panels
1
2
Microphone
3
4
5
6
7
8
9
Keypad
1 ANTENNA CONNECTOR
Connect the supplied antenna. (p. 1)
2 PTT SWITCH [PTT]
Hold down to transmit, release to receive. (p. 7)
3 SQUELCH ADJUSTMENT KEYS [SQL]/[SQL]
Push to adjust the squelch level.
4 UP/DOWN KEYS []/[]
z Push to change or select the frequency, Memory
channel, Set mode settings, and so on.
z While scanning, push to change the scanning
direction.
5 CLEAR/HOME KEY [CLR]/[HOME]
z Push to return to the VFO mode.
z Hold down for 2 seconds to reset the Set mode
settings to default.
6 MEMORY/MEMORY WRITE KEY [MR]/[MW]
z Push to enter the Memory Channel Selection
mode. (p. 7)
z Push [FUNC], and then push this key to enter the
Memory Write mode. (p. 9)
7 HEADSET JACK
Connects a third party headset through the optional
headset adapter. (p. 13)
8 LOCK KEY [
]
z Push to lock the keypad.
z Hold down for 2 seconds to unlock the keypad.
9 VOLUME/POWER SWITCH [VOL]
z Rotate to turn the transceiver ON or OFF.
z Rotate to adjust the audio output level.
Keypad
z Push to set the frequency, select a Memory
channel, and so on.
z Push [FUNC], and then push or hold down another
key within 3 seconds to use the secondary functions
listed below.
KEYS FUNCTIONS
Push [1]/[ANL] Turn the Automatic Noise
Limiter (ANL) function ON or
OFF.
Push [2]/[SCAN] Start a scan.
L Push [CLR] to stop a scan.
Push [3]/[GRP] In the Memory mode, enter
the Memory Selection mode.
Push [4]/[WX-ALT]* Turn the Weather Alert
function ON or OFF.
Push [5]/[DUP-W]* Enter the Duplex Frequency
Entry mode.
L Conrm the NAV band
frequency is selected.
Push [6]/[DUP]* Turn the Duplex function ON
or OFF.
L Conrm the NAV band
frequency is selected.
Push [7]/[WX]* Enter the Weather Channel
Selection mode.
Push [8]/[BEEP] Turn the Key beep ON or OFF.
Push [9]/[TAG] Tag or untag the selected
Memory channel or Weather
Channel*.
Hold down
[ENT]/[SET] for 1
second
Enter the Set mode.
Push [0]/[121.5] Select the emergency
frequency.
*For only the USA version.

Other manuals for Icom IC-A16

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-A16 and is the answer not in the manual?

Icom IC-A16 Specifications

General IconGeneral
BrandIcom
ModelIC-A16
CategoryTransceiver
LanguageEnglish

Related product manuals