To Next Page

To Previous Page

NXDN™ OPERATION

5-5

Previous view

NXDN operation enables you to make a call to a

specic station (Individual call) or to a particular group

(Group call)� Other digital mode transceivers on the

channel will not receive a call that does not match

their Individual or Group ID and/or Radio Access

Number (RAN) code�

D Transmitting an Individual or a Group call

1� Push [Digital Button] to enter the Application

selection mode�

• According to the current call type, “INDIV” (Individual

call) or “GROUP” (Group call) is briey displayed, and

then “VOICE” is displayed�

L If you want to change the call type, hold down [Digital

Button] for 1 second in the Standby mode�

2� Push [Digital Button] to select voice call�

3� Push [CH Up] or [CH Down] to select an Individual

station or a Group�

4� Push [PTT] to transmit a call�

5� Hold down [PTT] to speak�

6� Release [PTT] to receive�

TIP:

• You can also directly enter the Individual station

(or Group) selection mode by pushing [Call List

Select], depending on the presetting�

• When an Individual ID is set in the Memory CH,

you can transmit the Individual call by pushing

[PTT] on the channel�

• For the Ten-key type, you can also push a numeric

key to select the preset Individual station or Group,

depending on the presetting�

1� Rotate [Rotary Selector] to select a preset

Individual station or Group�

2� Push [PTT] to transmit a call�

3� Hold down [PTT] to speak�

4� Release [PTT] to receive�

Transmitting a call

Icom IC-F1100D User Manual

Other manuals for Icom IC-F1100D