3 - 1
SECTION 3 DISASSEMBLY INSTRUCTION
• REMOVING THE CHASSIS UNIT
1
Unscrew 1 nut A, and remove 2 knobs B and C.
2 Unscrew 2 screws D.
3 Take off the chassis unit in the direction of the arrow.
4 Disconnect the flat cable E form J501.
5 Remove the seal F.
6 Unscrew 2 nuts G and remove the plate H.
F
D
H
G
A
B
C
E
Chassis unit
J501
• REMOVING THE MAIN UNIT
1 Unsolder 1 point A.
2 Unscrew 1 screw B and remove the VR unit.
3 Unsolder 5 points C and remove the shield plate D.
4 Unsolder 10 points E.
5 Unscrew 7 screws F and remove the MAIN unit from the
chassis.
D
C
5
A
F
E
10
F
F
B
VR unit
MAIN unit
• REMOVING THE RF UNIT
1
Unsolder 3 points A.
2 Unscrew 4 screws B and remove the RF unit from the
chassis.
A
A
B
RF unit
• REMOVING THE FRONT UNIT
1 Disconnect the flat cable A from J503.
2 Unsolder 2 points B.
3 Unscrew 6 screws C and remove the plate D and FRONT
unit.
A
C
C
C
C
D
B
FRONT unit
J503
To Next Page
Loading...
Need help?
General
