To Next Page

To Previous Page

BIIS OPERATION

■ Transmitting an SDM

General

The short data message, SDM, can be sent to an individual

station or group stations. Also, 8 SDM memory channels are

available and the messages can be edited via PC program-

ming.

Transmitting an SDM

q While in the standby condition, push [P1] (Digital), then

push [UP] or [DOWN] to select the desired station/group

code.

w Push [P1] (Digital) again, then push [UP] or [DOWN] to

select the desired SDM.

Or, you can select the desired SDM using [Status Up]/

[Status Down] key directly.

e Push [P0] (Call) or [PTT]* to transmit the SDM to the

selected station/group.

*PTT call can be made only when PTT call capability is permitted.

•2 beeps will sound and the transceiver returns to the standby

condition automatically when the transmission is successful.

SDM is displayed.

IC-F34_44GT_GS-1.qxd 04.9.24 10:26 AM Page 23 (1,1)

Icom IC-F34GS User Manual

Other manuals for Icom IC-F34GS