Icom IC-M127 User Manual

3 BASIC OPERATION
@ Channel names
When shipped from the factory, the IC-M127 is programmed
with default names for each VHF marine channel (refer to the
VHF MARINE CHANNEL LIST on pgs. 40, 41). These de-
faults can be overwritten if desired.
@ Rotate [CHANNEL] to select a
channel to program.
@ Push [NAME] momentarily.
* The 1st character of the currently
programmed name flashes.
@ Rotate channel to select a
character.
Available characters
=~ (hyphen)
i
()
@® Push [HI/LO] to move to the
tight; then rotate [CHANNEL]
to select the next character.
*Pushing [SCAN] moves to the
left.
®Continue until the desired
characters have been se-
lected, then push [NAME] to
return to normal operation.

Icom IC-M127 Specifications

General

Brand	Icom
Model	IC-M127
Category	Transceiver
Language	English