EasyManuals Logo
Home>Icom>Transceiver>IC-M37

Icom IC-M37 User Manual

Icom IC-M37
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
19
8
SET MODE
8
18
17
16
15
14
13
12
11
10
9
7
6
5
4
3
2
1
CH Display “ ”/“ ”/“
Selects the number of digits to display the
channel number. You can select settings
for each channel group.
3d: The channel number is displayed in 3
digits, such as “78A.”
4d: The channel number is displayed in 4
digits, such as “1078.”
Float’n Flash “
Turns the Float’n Flash function ON or OFF.
You can easily retrieve the transceiver from
the water.
L This function works even if the transceiver
is turned OFF.
OFF: This function is OFF.
ON: The backlight, LED, or both of them
send out intermittent light when the
transceiver is oating on the water.
L This function is temporally OFF, and
the transceiver can be operated
when any key is pushed. This
function is turned ON in 10 seconds
after releasing the key.
Float’n Flash Alarm “
Selects whether or not an alarm sounds
while the light blinks when the transceiver
is oating on the water.
L This function is usable only when the
Float’n Flash is turned ON.
OFF: The alarm does not sound.
ON: The alarm sounds while the light
blinks when the transceiver is
oating on the water.
CAUTION: The alarm sounds loudly.
Float’n Flash Power Save “
Turns the Float’n Flash Power Save
function ON or OFF.
L This function is usable only when the
Float’n Flash is turned ON.
OFF: This function is OFF.
ON
: When the transceiver oats on the
water, it enters the Float’n Flash Power
Save mode to conserve battery power.
Low Battery Alarm “
Selects whether or not an alarm sounds
when the battery is low. A beep sounds
every time the battery indication is lower
than a displayed value. The beep interval
changes, as shown below, according to the
number of bars displayed.
Option
Beep interval
Battery
exhausted
Charging
required
Mid
OFF This function is OFF.
1
Every
30 seconds
2
Every
minute
3
Every
2 minutes
Delay Timer Subfunction “
Sets the Delay Timer Subfunction to 10,
30, 60 seconds, or OFF. A sub function is
turned OFF after the set period of time has
passed after releasing a specic key.
L When the timer is set to OFF, the sub function
is turned OFF when releasing the specied key.
L See page 13 for details.
Auto SP Line Convert “
Turns the Auto SP Line Convert function
ON or OFF.
L The speaker is converted into a microphone
by pushing [VOL/SQL] while holding down
[PTT], regardless of this setting. (p. 11)
OFF: This function is OFF.
ON: Automatically converts the speaker
into a microphone, when the
transceiver is oating on the water.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-M37 and is the answer not in the manual?

Icom IC-M37 Specifications

General IconGeneral
BrandIcom
ModelIC-M37
CategoryTransceiver
LanguageEnglish

Related product manuals