OTHER FUNCTIONS
9
5
Using the Surveillance function
When this function is turned ON, the beep is not heard
and the backlight and the Status indicator do not light,
even when a signal is received, or a key is pushed.
1. Assign the function to the [P1] key in the Menu
screen.
[OK] > Functions > Key Setup > P1 Key
2. Hold down [BACK] for 1 second to exit the Menu
screen.
3. Push [Surveillan] to turn the function ON or OFF.
L “ ” is displayed while the function is ON.
Using the AquaQuake function
The AquaQuake water draining function removes
water from the speaker grill by vibrating the internal
speaker.
1. Assign the function to the [P1] key in the Menu
screen.
[OK] > Functions > Key Setup > P1 Key
2. Hold down [BACK] for 1 second to exit the Menu
screen.
3. Hold down [AquaQu...] to use the function.
L Water in the speaker grill may muffle the sound
coming from the speaker.
L After the specified period of time, the function
automatically stops, even if you continue holding
down the key.
L The function works with only the internal speaker.
Using the Last Call Play function
The transceiver can playback the previously received
call.
L You can playback up to 6 latest calls.
L Conrm the Call Recorder function is turned ON.
([OK] > PTT Options > Call Recorder)
1. Assign the function to the [P1] key in the Menu
screen.
[OK] > Functions > Key Setup > P1 Key
2. Hold down [BACK] for 1 second to exit the Menu
screen.
3. Push [Last Call] to playback the received call.
To Next Page
Loading...
Need help?
General
