Display Description
/ /
Pre-Set Cooking mode operates.
Residual heat indicator
Warning! Risk of burns from
residual heat! After you switch o
the appliance, the cooking zones
need some time to cool down.
Look at the residual heat indicator
.
Use residual heat for melting and keeping
food warm.
Daily use
Switching on / o
Touch for 1 second to switch the
appliance on / o.
Automatic Switch O
The function switches o the appliance
automatically if:
• all cooking zones are deactivated.
• you do not set the power setting after
switching on the appliance.
• you cover any symbol with an object (a
pan, a cloth, etc.) for longer than approx.
10 seconds.
• you do not deactivate a cooking zone
after a certain time, or you do not modify
the power setting, or if overheating
occurs (e.g. when a pan boils dry). The
symbol
lights up. Before using again,
you must set the cooking zone to .
Power setting
Automatic switch o
after
, -
6 hours
-
5 hours
4 hours
-
1.5 hours
If cookware that is not suitable is
used, lights up on the display
and after 2 minutes the indicator
for the cooking zone deactivates.
Adjusting the power setting
Touch the power selector at a desired power
setting. Adjust to the left or the right, if
necessary. Do not release before you reach a
desired power setting.
Using the Booster function
The Booster function makes additional
power available for the induction cooking
zones. Touch to activate it,
lights up on the display. After a maximum of
10 minutes, the induction cooking zones
automatically return to the
power setting.
Bridge function
The function connects two right side cooking
zones and they operate as one. First set the
power setting for one of the cooking zones.
ENGLISH
13
To Next Page
Loading...
Need help?
General
