• Touch for 4 seconds. Set the power
setting in 10 seconds. You can operate the
appliance.
• When you switch o the appliance with
, the function operates again.
OSound Control - Deactivating and
activating the sounds
Deactivating the sounds
Switch o the appliance.
Touch
for 3 seconds. The displays comes
on and goes out. Touch for 3 seconds.
comes on, the sound is on. Touch ,
comes on, the sound is o.
When this function operates, you can hear
the sounds only when:
• you touch
• you put something on the control panel.
Activating the sounds
Switch o the appliance.
Touch for 3 seconds. The displays come
on and go out. Touch for 3 seconds.
comes on, because the sound is o. Touch
, comes on. The sound is on.
Power exchange function
• Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.
• The function decreases the power of the
other cooking zones connected to the
same phase.
• The power setting display of the reduced
zones changes between two levels.
Flexible induction cooking area
Warning! Refer to Safety
chapters.
Multi-Flexi mode
The exible induction cooking area consists
of four sections. The sections can be
combined into two cooking zones with
dierent size, or into one large cooking area.
You choose the combination of the sections
by choosing the mode applicable to the size
of the cookware you want to use. There are
three modes: Multi-Flexi mode 2 + 2 sections
(activated automatically when you switch on
the hob), Multi-Flexi mode 3 + 1 sections and
Multi-Flexi mode 4 sections.
To set the power setting use two
left side power selectors.
Switching between the modes
To switch between the modes use symbol:
.
ENGLISH 15
To Next Page
Loading...
Need help?
General
