When you switch between the
modes the power setting is set
back to 0.
Diameter and position of the cookware
Choose the mode applicable to the size and
the shape of the cookware. The cookware
should cover the selected area as much as
possible. Place the cookware centrally on the
selected area!
Place the cookware with the bottom
diameter smaller than 160 mm centrally on a
single section.
Place the cookware with the bottom
diameter larger then 160 mm centrally
between two sections.
Multi-Flexi mode 2 + 2 sections
This mode is active when you switch on the
hob. It connects the sections into two
separate cooking zones. You can set the
power setting for each zone separately. Use
two left side power selectors.
Correct cookware position:
Incorrect cookware position:
ENGLISH
16
To Next Page
Loading...
Need help?
General
