8
MICROWAVE OVEN CONTROL
Display
When power is first supplied to the microwave oven, the
language prompt (“PRESS 1-ENGL 2-FRNCH”) will scroll across
the display. Follow the prompts to select the language, then
follow the subsequent prompts to set the clock.
If an invalid value is entered, the invalid entry tones will sound,
and the input prompt will scroll again in the display. Retry your
entry. If no inputs are entered, the microwave oven will go into
standby mode, the “:” will blink in the display, and the language
will default to English. The display language may be changed
using the Setup Menu. See “Setup Menu” section.
If the blinking colon (“:”) appears at any other time, a power
failure has occurred. See “Clock” section for clock setting
instructions. See “Setup Menu” section for language changing
instructions.
When the microwave oven is in use, the display shows the
cooking power, cook time remaining, operating function,
quantities, weights and/or prompts. Then the microwave oven is
not in use (in standby mode), the display shows the time of day (if
clock is set) or Timer countdown (if Timer has been activated).
The speed of the scrolling text may be adjusted, if necessary. See
“Setup Menu” section for instructions.
Start
The START control begins any function. If it is not touched within
5 seconds after touching a function control or a number pad,
“PRESS START OR COOK POWER” will scroll in the display as a
reminder. If cooking is interrupted by opening the door, touching
START will resume the preset cycle.
NOTE: To avoid unintentional operation of the microwave oven,
a cooking function cannot be started if the microwave oven door
has been closed for about 5 minutes. “OPEN AND CLOSE
DOOR” will scroll in the display as a reminder. Open and close
the door, then touch START.
Off Cancel
The OFF CANCEL control clears any incorrect command, and
cancels the program during cooking. It will not erase the time
of day.
The microwave oven will also turn off when the door is opened.
Close the door and touch START to resume the cycle.
The OFF CANCEL control is also used to lock and unlock the
control panel. See “Control Lock” section.
To Next Page
Loading...
Need help?
General
