IKEA ISANDE User Manual

2. Press
4
OK button to conrm.
The Fan-cooling indicator is shown.
To switch o this function repeat the
procedure until the Fan-cooling indicator
disappears.
If the function is activated
automatically the Fan-cooling
indicator is not shown (refer to
"Daily use").
The activation of the Fan-cooling
Function increase the energy
consumption.
The fan stops when the door is open and
restarts immediately after the door closing.
High temperature alarm
When there is a temperature increase in the
freezer compartment (for example due to an
earlier power failure), the alarm and freezer
temperature indicators ash and the sound
is on.
To deactivate the alarm:
1. Press any button.
The sound switches o.
2. The freezer temperature indicator shows
the highest temperature reached for a
few seconds, then the display shows the
set temperature again.
The alarm indicator continues to
ash until the normal conditions
are restored.
If you do not press any button,
the sound switches o
automatically after around one
hour to avoid disturbing.
Door open alarm
If the fridge door is left open for
approximately 5 minutes, the sound is on
and alarm indicator ashes.
The alarm stops after closing the door.
During the alarm, the sound can be muted
by pressing any button.
If you do not press any button,
the sound switches o
automatically after around one
hour to avoid disturbing.
First use
Cleaning the interior
Before using the appliance for the rst time,
the interior and all internal accessories
should be washed with lukewarm water and
some neutral soap to remove the typical
smell of a brand-new product, then dried
thoroughly.
Caution! Do not use detergents,
abrasive powders, chlorine or oil-
based cleaners as they will
damage the nish.
Caution! The accessories and
parts of the appliance are not
suitable for washing in a
dishwasher.
ENGLISH 16

IKEA ISANDE Specifications

General

Brand	IKEA
Model	ISANDE
Category	Refrigerator
Language	English