Cleaning the filter of inlet hose
1
Close the water tap.
2
A
B
Disconnect the
hose. Press the lever
B and turn the fas-
tener A clockwise.
3
Clean the filter of
inlet hose.
4
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
Troubleshooting
The appliance does not start or it stops dur-
ing operation.
Before you contact the Service, refer to the
information that follows for a solution to the
problem.
With some problems, different indicators
flash continuously or intermittently at the
same time to show an alarm code.
ENGLISH 14
To Next Page
Loading...
Need help?
General
