IKEA SKINANDE User Manual

During the drying phase, the
door opens automatically and
remains ajar.
Caution! Do not try to close the
appliance door within 2 minutes
after automatic opening. This can
cause damage to the appliance.
AutoOpen is automatically activated with
all programmes excluding
.
To improve the drying performance refer to
the DryPlus option or activate AutoOpen.
To avoid possible hazards inside
the appliance (such as knives,
sharp objects or chemicals) for
children, pets or people with
disabilities deactivate the
function.
How to deactivate AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and hold
simultaneously and until
the indicators , , and
start flashing and the display is blank.
2. Press .
• The indicators
, and
are off.
• The indicator still flashes.
• The display shows the current setting:
= AutoOpen activated.
3. Press to change the setting: =
AutoOpen deactivated.
4. Press on/off to confirm the setting.
Before first use
1. Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not load the baskets.
After starting a programme, it
may take up to 5 minutes for the
appliance to recharge the resin
in the water softener. It seems
that the appliance is not working.
The washing phase starts only
after this procedure is completed.
The procedure is repeated
periodically.
ENGLISH 13

IKEA SKINANDE Specifications

General

Type	Built-in
Capacity	13 place settings
Noise Level	44 dB
Number of Programs	6
Child Lock	Yes
Delay Start	Yes