IKEA SY User Manual

2
4
3
2
4
1
1 3
2
4
1 2
3 4
Foot Stich
19
ENGLISH
TIP! Try sewing on a scrap of fabric rst to adjust any settings if
necessary before using the “proper” fabric.
Buttonholes
Make sure that the buttonhole foot is properly attached (see page 21).
Choose setting on the stitch selector and pull the top and bobbin
threads to the left.
1. Slide the buttonhole foot forwards to measure the length of the
buttonhole. Use the guidelines on the buttonhole foot. Lower the
buttonhole foot and needle. Slowly sew one side of the buttonhole until
you reach the end of the buttonhole foot. Finish with the needle in the
left hand position.
2. Change the stitch setting to and sew a few stitches. Finish with the
needle to the right.
3. Change the stitch setting to and sew all the way back until your
guidelines on the buttonhole foot are aligned. Finish with the needle in
the right hand position.
4. Change the stitch setting to and sew a few stitches. Finish with the
needle to the left.
5. When you have nished, lift the fabric and pull it about 15 cm
backwards. Cut the threads with the thread cutter, leaving them the
right length for when you start sewing the next seam. Cut open the
buttonhole using the seam ripper.

IKEA SY Specifications

General

Brand	IKEA
Model	SY
Category	Sewing Machine
Language	English