IKEA TRADFRI E1810 User Manual

REMOTE CONTROL FUNCTIONS
ON/OFF: Press to turn your light source
on and off.
Press and hold for at least 3 seconds to
synchronize your lights.
Dim up/down: Short presses will dim
up/down in steps. To dim up/down
seamlessly, press and hold the button.
Change white spectrum, colours or
scenes.
Pairing: Add IKEA Smart Lighting
products to your system. See
instructions below.
ADDING DEVICES TO YOUR
REMOTE CONTROL
When the remote control is sold together
with a light source (in the same package),
they are already paired. If the remote
control is purchased separately, you must
manually pair it to your light source.
To add light sources, just repeat the steps
below.
1 Make sure that your light source is
installed and the main power switch is
turned on.
2 Hold the remote control close to the light
source you want to add (no more than 5
cm away).
3 Press and hold the pairing button for
at least 10 seconds. A red light will shine
steadily on the remote control. Your
light source will begin to dim and ash
one time to indicate that it has been
successfully paired.
Up to 10 light sources can be paired with 1
remote control.
Make sure to pair them one at a time. If
the light sources are close to each other,
disconnect those that have already been
paired from the main power switch.
ENGLISH 4

IKEA TRADFRI E1810 Specifications

General

Brand	IKEA
Model	TRADFRI E1810
Category	Remote Control
Language	English