To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if my Indel Webasto Marine Refrigerator compressor runs but doesn't cool?
If the compressor is running but the refrigerator isn't cooling, it's possible there's a refrigerant leak in the condenser or line. A qualified technician should perform a seal check, repair any leaks, and refill the correct amount of R134a refrigerant.
General| Category | Refrigerator |
|---|---|
| Brand | Indel Webasto Marine |
| Type | Drawer Refrigerator |
| Material | Stainless Steel |
| Installation | Built-in |
| Series | Isoterm Drawer Inox Series |
| Capacity | Varies by model (specific model required) |
| Cooling System | Compressor |
| Power Supply | DC |
| Voltage | 12/24V DC |
| Thermostat | Adjustable |
| Refrigerant | R134a |
| Dimensions (HxWxD) | Varies by model (specific model required) |
| Weight | Varies by model (specific model required) |
Product compliance with WEEE directive and proper disposal guidelines.
Warnings regarding R134a refrigerant, product usage, and general hazards.
How to adjust the temperature using the thermostat knob.
Tips for efficient operation, power consumption, and maintenance.
Procedures for defrosting standard and No-Frost Isotherm models.
Instructions for activating and using the DR160 COMBO ice maker.
How the unit protects against low battery voltage.
Recessed installation, positioning, and anchoring requirements.
Step-by-step instructions for installing custom models with front panelling.
Importance of proper ventilation for the compressor/condensing unit.
Procedure for connecting the unit to the vehicle's electrical system.
