Innova ITX9688 User Manual

Step 1 – Base Frame Assembly
5
PLEASE NOTE:
RIGHT (R) Indicates right side while using the
inversion table, not facing it.
LEFT (L) Indicates left side while using the
inversion table, not facing it.
NUTS (21) are Nylon Lock Nuts. To tighten,
you need two wrenches.
Make sure the Stopper (34) on the
Cross Bar (12) is facing out and attach
the Cross Bar (12) to the Front Base
Frame (9R&9L) using 4 Bolts (20), 2
Metal Support Plates (54), 4 Flat
Washers (19) and 4 Lock Nuts (21).
NOW Tighten all Bolts (32&20).
Insert 4 Base Frame End Caps (31)
into both Bottom Tubes (1).
Unfold the Front Base Frame (9R&9L)
from the Rear Base Frame (8R&8L)
and let it stand on the floor.
Lay the Right Base Frame (8R&9R) and
the Left Base Frame (8L&9L) on the floor
with the Connecting Brackets (11R&11L)
facing each other. Make sure the
indented holes on the Bottom Tubes (1)
are facing downward and attach one
Bottom Tube (1) to the Front Base Frame
(9R&9L) using 2 Bolts (32). Attach the
other Bottom Tube (1) to the Rear Base
Frame (8R&8L) using 2 Bolts (32).
DO NOT tighten Bolts (32) until the
Cross Bar (12) is attached.
Installation Guidance Video DOES NOT replace Owner’s Manual.
Please be sure to read the Owner’s Manual in its entirety.
http://innovaproductsinc.com/innova9688/
or search “Innova ITX9688 Installation Guide” on YouTube.com
Indented
hole
32
32
32
32
Right
Left
1
! Warning
Rear
8L
8R
9R
9L
11R
11L
Front
1
11R&11L
facing each other
Warning
Label
31
20
19
21
19
21
19
19
20
Right
Left
1
! Warning
Front
Rear
8L
8R
9R
9L
31
31
31
12
54
54
34
Stopper
is facing out
20
21
21

Innova ITX9688 Specifications

General

Brand	Innova
Model	ITX9688
Category	Fitness Equipment
Language	English