44
NS-28DD310NA15 Insignia 28" LED TV/DVD Combo
www.insigniaproducts.com
Password—Lets you set or change the parental
control password. You must enter the password to
set the parental rating level and to view DVDs with
a locked rating level.
1 Select Password, press
X
to highlight Change,
then press OK. The password screen opens.
2 Use the number buttons on the remote control
to enter the old password in the Old Password
box. The default password is (0000). If you
forget your password, enter 9999.
3 Press
T
to move to the New Password box,
then enter a new password.
4 Press
T
to move to the Confirm PWD box, then
enter the new password again.
Default—Resets all DVD settings, except the
parental control setting and password, to the
defaults.
Using INlink
INlink lets you control HDMI CEC-compatible
devices connected to the HDMI jacks on your TV
using the remote control that came with your TV. To
use INlink, you must set the INlink Control setting
on the SETTINGS · INlink menu to On.
Turning INlink on or off
1 Press TV-MENU. The on-screen menu opens.
2 Press
W or X to highlight SETTINGS, then press
T or ENTER. The SETTINGS menu opens.
3 Press
S or T to highlight INlink, then press
ENTER. The SETTINGS · INlink menu opens.
4 Press
S or T to highlight INlink Control, then
press ENTER.
5 Press
S or T to highlight On or Off, then press
ENTER.
6 Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.
Note
When you select Default, the Setup menu
closes. To open the menu again, press
SETUP.
Notes
• HDMI cables must be used to connect
HDMI CEC-compatible devices to your TV.
• The connected device’s HDMI CEC feature
must be turned on.
• If you connect an HDMI device that is not
HDMI CEC-compatible, none of the
INlink Control features work.
• Depending on the connected HDMI
device, some INlink Control features
may not work.
To Next Page
Need help?
General
