55
Insignia 28" LED TV/DVD Combo
www.insigniaproducts.com
Selecting the audio out mode
If your TV is on when you connect a device to the
/AUDIO OUT jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1 Connect headphones, an amplifier, a home
theater system, or a sound bar to the
/AUDIO OUT jack on the side of your TV. The
following screen opens.
2 Press
W or X to highlight the audio out mode
you want to use, then press ENTER. You can
select:
• Headphones/Audio Out Variable—Select
this option to use the remote control that
came with your TV to control the audio from
headphones or the home theater system or
sound bar you connected to the /AUDIO
OUT jack.
• Audio Out Fixed—Select this option to use
the remote control that came with the home
theater system or sound bar you connected to
the /AUDIO OUT jack to control the audio.
Playing TV audio only
You can turn off the picture on your TV and listen to
the program audio only.
1 Press TV-MENU. The on-screen menu opens.
2 Press
W or X to highlight CHANNELS, then press
T or ENTER. The CHANNELS menu opens.
3 Press
S or T to highlight Audio Only, then
press ENTER.
4 Press
S or T to select On.
5 Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.
Notes
• The picture turns off in about five
seconds.
• Audio Only works only when the
input source is TV, and your TV is
receiving a broadcast signal.
• To exit audio only mode, press any
button. When you exit audio only
mode, the Audio Only option is
automatically reset to Off.
To Next Page
Loading...
Need help?
General
