77
Insignia 28" LED TV/DVD Combo
www.insigniaproducts.com
My TV does not
turn on when I
turn on my
device.
• Make sure that the INlink
feature is turned on. See
“Turning INlink on or off” on
page 44.
• Make sure that TV Auto Power
On is set to On on the INlink
menu. See “Turning TV Auto
Power On on or off” on page 45.
• The device may not support this
feature. See the documentation
that came with the device for
more information.
The Audio
Receiver
setting on the
INlink menu
keeps turning
back on after it
is turned off.
• When Audio Receiver is set to
Off and INlink Control is set to
On and you make an
adjustment to the audio
receiver (for example, turn the
volume knob or press a button),
Audio Receiver is
automatically set to On. To
prevent this from happening,
turn off the INlink feature. See
“Turning INlink on or off” on
page 44.
Problem Solution
Two volume
bars appear
when adjusting
the volume.
• When you adjust the volume on
the audio receiver or with the
TV remote control, a double
volume bar appears, one for the
TV volume and one for the
audio receiver volume.
I cannot select
the Root Menu
option on the
INlink menu.
OR
The device’s
root menu does
not open when
I select Root
Menu on the
INlink menu.
• The device may not support this
feature. See the documentation
that came with the device for
more information.
Note
If the problem is not solved by using these
troubleshooting instructions, turn off your
TV, then turn it on again.
Problem Solution
To Next Page
Loading...
Need help?
General
