Insignia NS-32D311MX17 User Manual

24
NS-32D311NA17 / NS-32D311MX17
www.insigniaproducts.com
Connecting external speakers or a soundbar
You can connect external speakers using:
• Digital audio
•Analog audio
Digital audio
1 Make sure that your TV’s power cord is unplugged and the digital speaker system or soundbar is turned off.
2 Connect a digital optical audio cable (not provided) to the DIGITAL OUTPUT (OPTICAL) jack on your TV and to the
optical AUDIO IN jack on the digital speaker system or soundbar.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the digital speaker system or soundbar, then set it to the correct source. For more information, see the
documentation that came with the digital speaker system or soundbar.
5 On your TV’s Audio menu, highlight Digital Audio Format/Audio Delay, then press ENTER or
X. Set the Audio
Format option to PCM. See the Digital Audio Format/Audio Delay option in Adjusting sound settings on page 44.
Digital optical
audio cable
Digital speaker system
Side of TV
Digital optical
audio cable
connector
Digital optical
audio jack
On your TV
Soundbar

Insignia NS-32D311MX17 Specifications

General

Brand	Insignia
Model	NS-32D311MX17
Category	LED TV
Language	English