Insignia NS-32D311NA15 User Manual

58
Insignia 32" LED TV
www.insigniaproducts.com
B If you select Cable Service, a message asks if
you have a cable box:
•Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
•Select Ye s , then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV.
•Select HDMI, Component, or AV, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
•Select Coaxial, then press ENTER if you
connected a cable box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan
(VHF channels only).
C If you select Satellite Service, a message
asks how you connected the satellite box to
your TV:
• Select HDMI, Component, or AV, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.
Note
You can press EXIT to stop the auto
channel search, but you will need to run
the auto channel search again to create a
channel list.

Insignia NS-32D311NA15 Specifications

General

Brand	Insignia
Model	NS-32D311NA15
Category	TV
Language	English