12
NS- DPF0812W
www.insigniaproducts.com
4 Extend the stand from the back of the frame, then place
the frame on a flat surface. Push or pull the stand to
adjust the viewing angle.
5 Slide the power switch to the ON position. The frame
automatically turns on and starts playing a slideshow of
the pictures stored in internal memory. This slideshow is
called Demo mode.
To turn off Demo mode, point the remote control
at the front of the frame and press ENTER.
Using your picture frame
You can use your digital picture frame to:
• Play a slideshow of pictures
• Adjust a picture’s view
• Change display settings
Tip
You can also disable and re-enable Demo mode
from the Setup menu. For instructions, see
“Setup options” on page 25.
To Next Page
Loading...
Need help?
General
