Insignia NS-FDRE67WH8A-C User Manual

21
6.7 Cu. Ft. Front-Load Electric and Gas Dryers
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
Reversing the dryer door
1 Make sure that the power cord is unplugged.
2 While supporting the door, remove the four hinge screws from the door, then lift the door to remove it and set
the door aside.
3 Remove the screws for the locker cover on the right side of the dryer and the screws for the locker cover on the
left side of the dryer.
4 Install the locker onto the right side of the dryer with the screws you just removed, then install the locker cover
on the left side of the dryer.
5 Remove the screws around the door.
Remove the screws
Remove the screws
Caution
Be careful not to drop the door when removing the screws.
Remove the
locker cover
screws
Remove the
locker screws
NS-FDRE67WH8A-C_NS-FDRE67WH8A_NS-FDRG67WH8A_17-0815_MAN_V5_EN.fm Page 21 Wednesday, November 15, 2017 12:25 PM

Insignia NS-FDRE67WH8A-C Specifications

General

Brand	Insignia
Model	NS-FDRE67WH8A-C
Category	Dryer
Language	English