20
NS-HAWHP2
www.insigniaproducts.com
Specifications
Cannot pair the
headphones
• Shorten the distance between the docking station
and your headphones.
• Make sure that the docking station is in pairing
mode. Press and hold the pairing button for five
seconds to re-enter pairing mode.
• Turn on the docking station, then place the
headphones onto the station. They will enter
autopairing mode (this may take 2-20 seconds).
Tip: If the power indicators on the headphones and docking
station continue to blink after 20 seconds, they are no longer
paired to each other. If this happens, follow these steps:
1 Make sure that the headphones and docking station
are within range of each other (ideally in the same
room).
2 Turn off the headphones and the docking station.
3 Turn on both the headphones and the docking
station. The lights will initially blink, then they light
solid blue when connected.
Headphone dimensions
(H x W x D)
7.5 x 3.0 x 6.7 in. (191.2 x 76.8 x 171.2 mm
Docking station
dimensions (H x W x D)
8.5 x 3.8 x 4.7 in. (214.7 x 96.5 x 119.9 mm)
Input AC 100-240V~ 50/60 Hz 0.3 A
Output 5V, 500mA
Battery life Up to 10 hours
Range 33 feet (10 m)
Charging time 2 hours
Audio resolution 48 Khz @ 24 bits
Audio Source Ports Analog: RCA
Digital: Optical PCM (does not support DTS and
Dolby Audio)
Problem Solution
To Next Page
Loading...
Need help?
General