Insignia NS-RSS26SS0 User Manual

www.insigniaproducts.com
17
NS-RSS26SS0/NS-RSS26WH0
Connecting the water supply to your refrigerator
You need to purchase several items to complete this connection. You may find these items sold as a kit at your local
hardware store.
You can use plastic tubing, copper tubing, or stainless steel tubing.
1 Connect the household water line to the assembled compression fitting.
If you are using copper tubing, slip the compression nut (not supplied) and ferrule (not supplied) on the copper tubing
(not supplied).
OR
If you are using plastic tubing, insert the molded end (bulb) of the plastic tubing into the compression fitting.
OR
If you are using stainless steel tubing, slip the compression nut on the copper tubing (not supplied).
2 Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut.
3 Turn the water on and check for any leakage. If you find water drops or leakage in the connection areas, turn off the
main water supply, then check the connections and tighten, if necessary.
PLASTIC TUBING COPPER TUBING STAINLESS STEEL TUBING
• 1/4" plastic tubing
with molded end (bulb)
• 1/4" copper tubing • 1/4" copper tubing
• 1/4” compression nut (1) • 1/4" compression nut (1) • 1/4" compression nut (1)
• Ferrule (2)
Important: Do not use without the molded end (bulb) of the plastic tubing.
Compression nut
(assembled)
Ferrule
Copper tubing
(not supplied)
Plastic tubing
(not supplied)
Stainless steel tubing
(not supplied)
Molded end
(bulb)
Compression nut (1/4")
(not supplied)
Compression nut (1/4")
Plastic tubing
(assembled)
Compression fitting
(assembled)
Refrigerator
Water supply line

Insignia NS-RSS26SS0 Specifications

General

Brand	Insignia
Model	NS-RSS26SS0
Category	Refrigerator
Language	English