Insignia NS-RTM18WH8Q User Manual

8
NS-RTM18WH8Q/NS-RTM18WH8Q-C/NS-RTM18BK8Q
www.insigniaproducts.com
Installing the door handle
You will need: A Phillips screwdriver and the included Allen wrench.
Parts included with the handle kit:
1 Insert the two Phillips-head screws into the refrigerator door on the side you
prefer, then tighten.
2 Align the door handle with the screws.
3 Insert the two Allen-head screws through the side of the door handle and
tighten with the Allen wrench.
4 Place the screw caps on the screws.
Screws (4)
Allen wrench
Handle assembly
Allen wrench
caps (4)
Allen wrench
screws (4)

Insignia NS-RTM18WH8Q Specifications

General

Brand	Insignia
Model	NS-RTM18WH8Q
Category	Refrigerator
Language	English