Intel Desktop Board D101GGC Product Guide
36
Connecting the Serial ATA (SATA) Cable
The SATA cable (4-conductor) supports the Serial ATA protocol and connects a single drive to the
desktop board. Either end of the cable can be connected to the SATA drive or the connector on the
board.
For correct cable function:
1. Observe the precaution in "
Before You Begin" on page 23.
2. Attach the locking cable end to the connector (
Figure 17, A) on the board.
3. Attach the cable end without a lock to the drive (
Figure 17, B).
OM18216
A
B
Figure 17. Connecting the Serial ATA Cable
To Next Page
Loading...
Need help?
General
