Intel Desktop Board D945GCLF2 Technical Product Specification
26
1.11.2 RJ-45 LAN Connector with Integrated LEDs
Two LEDs are built into the RJ-45 LAN connector (shown in Figure 4).
Figure 4. LAN Connector LED Locations
Table 5 describes the LED states when the board is powered up and the
10/100/1000 Mbits/sec LAN subsystem is operating.
Table 5. LAN Connector LED States
LED LED Color LED State Condition
A Green Blinking LAN activity is occurring.
Off 10 Mbits/sec data rate is selected.
On 100 Mbits/sec data rate is selected.
B Yellow
On 1000 Mbits/sec data rate is selected.
To Next Page
Loading...
Need help?
General
