Intel Desktop Board D945PLNM Technical Product Specification
10
1.1 Overview
1.1.1 Feature Summary
Table 1 summarizes the major features of the board.
Table 1. Feature Summary
Form Factor
microATX (9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters])
Processor
Support for the following:
• Intel
®
Pentium
®
D processor in an LGA775 socket with an 800 MHz system bus
• Intel
®
Pentium
®
4 processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel
®
Celeron
®
D processor in an LGA775 socket with a 533 MHz system bus
Memory
• Two 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR2 533 or DDR2 400 MHz DIMMs
• Support for up to 2 GB of system memory
Chipset
Intel
®
945PL Chipset, consisting of:
• Intel
®
82945PL Memory Controller Hub (MCH)
• Intel
®
82801G I/O Controller Hub (ICH7)
Audio
6-channel (5.1) audio subsystem with three analog audio outputs using the
Sigmatel* 9220 audio codec
Legacy I/O Control
Legacy I/O controller for diskette drive, serial, parallel, and PS/2* ports
USB
• Support for USB 2.0 devices
• Support for USB anti-theft circuitry on back-panel USB connectors (requires the
use of Intel
®
Platform Administrator Technology software, available separately)
Peripheral
Interfaces
• Eight USB ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
LAN Support
10/100 Mbits/sec LAN subsystem using the Intel
®
82562GX Platform LAN Connect
(PLC) device with ASF 1.03 support
BIOS
• Intel
®
BIOS (resident in the SPI Flash device)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
Expansion
Capabilities
• Two PCI Conventional* bus connectors
• One PCI Express* x1 bus add-in card connector
• One PCI Express x16 bus add-in card connector
continued
To Next Page
Loading...
Need help?
General
