Intel Desktop Board D945PLRN Technical Product Specification
10
1.1 Overview
1.1.1 Feature Summary
Table 1 summarizes the major features of the board.
Table 1. Feature Summary
Form Factor
ATX (12.00 inches by 9.60 inches [304.80 millimeters by 243.84 millimeters])
Processor
Support for the following:
• Intel
®
Pentium
®
D processor in an LGA775 socket with an 800 MHz system bus
• Intel
®
Pentium
®
4 processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel
®
Celeron
®
processor in an LGA775 socket with a 533 MHz system bus
Memory
• Two 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR2 533 or DDR2 400 MHz DIMMs
• Support for up to 2 GB of system memory
Chipset
Intel
®
945PL Chipset, consisting of:
• Intel
®
82945PL Memory Controller Hub (MCH)
• Intel
®
82801G I/O Controller Hub (ICH7)
Audio
6-channel (5.1) audio subsystem with three analog audio outputs using the
Sigmatel* 9220 audio codec
Legacy I/O Control
Legacy I/O controller for diskette drive, serial, parallel, and PS/2* ports
USB
Support for USB 2.0 devices
Peripheral
Interfaces
• Eight USB ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
LAN Support
10/100 Mbits/sec LAN subsystem using the Intel
®
82562GX Platform LAN Connect
(PLC) device
BIOS
• Intel
®
BIOS (resident in the SPI Flash device)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
Expansion
Capabilities
• Four PCI Conventional* bus connectors
• Two PCI Express* x1 bus add-in card connectors
• One PCI Express x16 bus add-in card connector
Instantly Available
PC Technology
• Support for PCI Local Bus Specification Revision 2.3
• Support for PCI Express Revision 1.0a
• Suspend to RAM support
• Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports
continued
To Next Page
Loading...
Need help?
General
