To Next Page

To Previous Page

Installing and Replacing Desktop Board Components

4. Remove the processor from its protective cover. Hold the processor only at the

edges, being careful not to touch the bottom of the processor (see Figure 9).

NOTE

Do not discard the processor cover. Always replace the processor cover if you

remove the processor from the socket.

Figure 9. Remove the Processor from the Protective Cover

5. Hold the processor with your thumb and index finger oriented as shown in

Figure 10 to align your fingers with the socket fi

nger cutouts. Make sure that the

processor Pin 1 indicator (gold triangle) is aligned with the Pin 1 chamfer on the

socket (Figure 10, B) and that the notches on the processo

r align with

the posts on

the socket (Figure 10, C). Lower the processor straigh

t down without tilting or

sliding it in the socket (Figure 10, A).

Figure 10. Install the Processor

Intel DH61ZE Product Guide

Other manuals for Intel DH61ZE