Intel DP43TF - CARACTERISTIQUES TECHNIQUES User Manual

Installing and Replacing Desktop Board Components
37
To install a DIMM, follow these steps:
1. Observe the precautions in "Before You Begin" on page 25.
2. Turn off all peripheral devices connected to the computer.
Turn off the computer
and disconnect the AC power cord.
3. Remove the computer’s cover and locate the DIMM sockets (see Figure 17).
Figure 17. Installing a DIMM
4. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the
open position.
5. Holding the DIMM by the edges, remove it from its anti-static package.
6. Position the DIMM above the socket. Align the small notch at the bottom edge of
the DIMM with the keys in the socket (see inset in Figure 17).

Intel DP43TF - CARACTERISTIQUES TECHNIQUES Specifications

General

Brand	Intel
Model	DP43TF - CARACTERISTIQUES TECHNIQUES
Category	Computer Hardware
Language	English