Intel NUC5i3RYH User Manual

8
NUC5i3RYH, NUC5i3RYHS, NUC5i5RYH
User Guide – August 2018
3.0 Install and Remove System Memory
Intel NUC Kits NUC5i3RYH, NUC5i3RYHS, and NUC5i5RYH have two 260-pin DDR4
SO-DIMM memory slots
Memory requirements:
 1.35V low voltage memory
 1333 MHz or 1600 MHz SO-DIMMs
 Non-ECC
Find compatible system memory modules at the Intel® Product Compatibility Tool:
 NUC5i3RYH
 NUC5i3RYHS
 NUC5i5RYH
3.1 Install SO-DIMMs
If you plan to install just one SO-DIMM, install it in the lower memory socket.
To install the SO-DIMMs, follow these steps:
1. Observe the precautions in "Before You Begin" in Section 1.1.
2. Turn off all peripheral devices connected to the computer. Turn off the
computer and disconnect the AC power cord.
3. Align the small notch at the bottom edge of the SO-DIMM with the key in
the socket.
4. Insert the bottom edge of the SO-DIMM into the socket.
5. When the SO-DIMM is inserted, push down on the outer edge of the
SO-DIMM until the retaining clips snap into place. Make sure the clips
are firmly in place.

Intel NUC5i3RYH Specifications

General

Brand	Intel
Model	NUC5i3RYH
Category	Desktop
Language	English