Intel SE7520BD2 User Manual

Hardware Installations and Upgrades
Intel® Server Board SE7520BD2
9
2 Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the Safety Information at the
beginning of this manual.
Tools and Supplies Needed
 Phillips
*
(cross head) screwdriver (#1 bit and #2 bit)
 Needle-nosed pliers
 A ruler
 Pen or pencil
 Anti-static wrist strap and conductive foam pad (recommended)
Installing and Removing Memory
The silkscreen on the board for the DIMMs displays DIMM1B, DIMM1A, DIMM2B, DIMM2A,
DIMM3B, DIMM3A starting from the edge of the board. See Memory
for a discussion of the
memory requirements and options. See Additional Information and Software
for a link to the list of
tested DIMMs for this server board.
Installing DIMMs
To install DIMMs, follow these steps:
1. Observe the safety and ESD precautions at the beginning of this book.
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord from the server.
4. Remove the chassis cover and locate the DIMM sockets.

Intel SE7520BD2 Specifications

General

Brand	Intel
Model	SE7520BD2
Category	Server Board
Language	English