To Next Page

To Previous Page

OPERATING THE ACU

SELECT PROCESS TYPE

BACKUP USER DATA

4. Press UP and DOWN arrow keys to SELECT PROCESS TYPE*

Press OK key to set the parameter and the processing message will be displayed.

SELECT PROCESS TYPE*

BACKUP USER DATA: To backup the antenna settings set by user to the ACU.

RESTORE USER DATA: To restore the antenna by using the backup user data stored

from the ACU.

DEFAULT ACU-REMOTE P/W: To change the web server module's password to default.

UPGRADE FROM USB: To upgrade the system by using rmware les (FWP)

from a specied folder in a USB ash drive.

COPY LOG TO USB: to copy the antenna log data from the system to a USB ash drive.

BACKUP TO USB: To backup the antenna settings set by user to a USB ash drive.

RESTORE FROM USB: To restore the antenna by using the backup user data from a

USB ash drive.

UPGRADE ACU-REMOTE: To upgrade the system using rmware les (FWP) from a

specied folder in a USB ash drive.

NOTE: UPGRADE FROM USB, COPY LOG TO USB, BACKUP TO USB, RESTORE FROM USB and

UPGRADE ACU-REMOTE options are displayed only if the USB ash drive is plugged into the USB

port.

System Management

System menu

Backup and restore

Setup mode

SETUP MODE ?

YES NO

1. Press LEFT arrow key to move cursor to YES and press OK key to enter SETUP mode.

+ANTENNA +SATELLITE

+SYSTEM +INSTALLATION

2. Press DOWN arrow key to move cursor to SYSTEM menu and press OK key to enter it.

+SET LOCAL +SET LOCATION

+MODEM PORT +MANAGEMENT

3. Press arrow keys to move cursor to MANAGEMENT menu and press OK key to enter it.

Select process type

Processing

Intellian v80G User Manual

Questions and Answers: