(38IO) I638AA AIRBED ENGLISH 4.875” X 7.25” 07/28/2020
38IO
SAVE THESE INSTRUCTIONS
Page 3
PARTS REFERENCE
BATTERY INSTALLATION
1. Unfold the airbed and open the electric air pump cover (3) to reveal the electric air pump
(2). See Fig (1).
2. Remove the electric air pump by turning the air pump rim counterclockwise, and pull the
air pump out. See Fig (1).
3. Open the battery cover (5), insert 4 “AA” alkaline batteries (NOT INCLUDED) as shown
on the drawings inside the battery compartment, close and latch the battery cover.
See Fig (2).
Note: Drawings for illustration purposes only. Actual product may vary. Not to scale. Due to
a policy of continuous product improvement, Intex reserves the right to change specifications
and appearance, which may result in updates to the instruction manual, without notice.
4. Insert the electric air pump in the airbed by aligning the arrow on the pump body with the
arrow on the pump holder frame (1). Turn the air pump clockwise to lock it. See Fig (3-4).
2
8
7
5
1
4
3
6
1. Pump holder frame
2. Electric air pump
(Part number: #12991)
3. Electric air pump cover
4. Manual inflation port and cap
5. Battery cover
6. Power switch
7.
Built-in pressure adjuster insert plug
(Part number: #10044)
8. Built-in pressure adjuster cap
(Part number: #10043)
3
Alignment
arrow
4
Airbed
1
1
2
2
To Next Page
Loading...
Need help?
General
